RIG CATEGORIES

1.1 DEFINITION
8.3 INSPECTIONS
1.2 RIG TYPES
- Periodic inspections
02. ON-SHORE RIGS
- Frequency of Periodic Inspections
2.1 DUTY
- API Recommended Practice 8B
2.2 TYPES TRANSPORT
- Dimensional Inspection
- CONVENTIONAL RIG
- NDT Inspection
- FAST MOVING RIG
09. HOOK
- HELI-RIG
9.1 FUNCTION
2.3 DRILLING RIG MAIN SYSTEMS
9.2 TYPES AND CHARACTERISTICS
- HOISTING & ROTATION SYSTEM
Standard Hook
- POWER GENERATION SYSTEM
Unitized Hook

- MUD CIRCULATING SYSTEM
Combination Travelling Block and Hook
- WELL CONTROL SYSTEM
9.3 INSPECTIONS
03. RIG SITE
- API Recommended Practice 8B
3.1 RIG SITE
- Dimensional Inspection
- Dimensions and Safety
- NDT Inspection
- Lay-out Examples
10. DRILLING LINE
- Civil Works on Location
10.1 DRILLING LINE STRUCTURE
3.2 CELLAR DIMENSIONS
10.2 TYPES AND CHARACTERISTICS
3.3 WASTE PIT DIMENSIONS
10.3 DRILLING LINE REEVING
04. SUBSTRUCTURE

10.4 DEADLINE ANCHOR
4.1 FUNCTION
10.5 SAFETY FACTOR
4.2 SUBSTRUCTURE LOAD and DIMENSIONS
10.6 DRILLING LINE WEAR
4.3 TYPES AND CHARACTERISTICS
SLIP AND CUT TON-MILES CALCULATION
4.4 RIG UP SYSTEMS
SLIP AND CUT
- SWING UP - PYRAMID
11. POWER GENERATION SYSTEMS
- SWING LIFT - BRANHAM
11.1 TYPES OF POWER GENERATORS
- SLING SHOT DRECO
FOR MECHANICAL RIGS
4.5 INSPECTIONS
FOR ELECTRIC RIGS
05. DERRICK
12. DIESEL ELECTRIC POWER GENERATION SYSTEM
5.1 CONCEPTUAL DESIGN
12.1 DIESEL ENGINES
5.2 TYPES AND CHARACTERISTICS
12.2 POWER GENERATORS
- DERRICK
- DC GENERATORS
- MAST
- AC GENERATORS
- RAM RIG
12.3 DC ENGINES
5.3 RIGGING UP
12.4 AC ENGINES
5.4 DRILLING LOADS
12.5 ENGINE CONTROLS
- Calculation of Drilling Loads at Crown Block
- Current Control Panel
- Definition of Gross Nominal Capacity
- Driller Control Panel
5.5 INSPECTION
12.6 SCR SYSTEM

06. DRAWWORKS
13. PNEUMATIC SYSTEM
6.1 FUNCTION
13.1 FUNCTIONS
6.2 TYPES AND CHARACTERISTICS
13.2 CHARACTERISTICS
6.3 MAIN SYSTEMS
13.3 APPLICATIONS
a - Main Drum

14. ROTARY TABLE & MASTER BUSHING

b - Catheads

14.1 FUNCTIONS
c - Stationary Brake
14.2 DIMENSIONS AND CHARACTERISTICS
d - Auxiliary brake / dynamic brake
14.3 TYPES OF ROTARY TABLE
6.4 POWER CALCULATION
14.4 TYPES OF MASTER BUSHINGS
6.5 INSPECTIONS
14.5 TYPES OF CASING BUSHINGS
07. CROWN BLOCK
15. KELLY & DRIVE BUSHING
7.1 FUNCTION
15.1 FUNCTION AND TYPES
7.2 TYPES AND CHARACTERISTICS
15.2 DIMENSIONS (HEXAGONAL KELLY)
7.3 INSPECTIONS
15.3 DRIVE BUSHING
08. TRAVELLING BLOCK
- Kelly Bushing
8.1 FUNCTION
- Roller Assembly
8.2 TYPES AND CHARACTERISTICS
15.4 OPERATION

About this blog

Hello All,
I hope this website you can found any that you are looking for specially for the RIG information.
This blog all contains rig information and can be increased your knowledge specially for the offshore structures.

Greetings from MY.

Laman

Powered by Blogger.

Labels

Popular Posts

  • SUBSTRUCTURE
    1.FUNCTION The substructure has the function of supporting the drawworks, rotary table, stands of DP and derrick. The top side is general...
  • DERRICK
    1 CONCEPTUAL DESIGN - Derricks Derricks and Masts consist of a steel framework with a square or rectangular cross-section. Their purpose i...
  • CELLAR DIMENSIONS
    - Cellar breadth Cellar breadth is usually decided with the Rig Contractor, considering well head, BOP and substructure. The cellar is us...
  • RIG UP SYSTEMS
    - SWING UP - PYRAMID Drawwork lifts the mast, the substructure and the complete rig floor. Only 2 main lifts are required - 1st lift to pi...
  • RAM RIG
    The RAM RIG is a new concept used to hoist the drill string. The Drawwork and the drilling line are replaced with a system of hydraulic pis...
  • Rig Type
    a. On-shore Drilling     -. Conventional     -. Fast Moving     -. Heli-transportable b. Off-shore Drilling      b1. Bottom se...
  • HOISTING & ROTATION SYSTEM
    HOISTI N G & RO T AT I ON S Y ST E M 1. MAST & SUBS T RUCTURE 2. CRO W N BLOCK 3. TRAVEL L ING B L OCK 4. TOP DR ...
  • MUD CIRCULATING SYSTEM
    MUD CIRCULATING SYST E M 1. MUD PITS 2. MUD M I XING H OP PE R 3. MUD PUMPS ( HI AND LOW PRE S SUR E ) 4. SHAK E RS ...
  • WELL CONTROL SYSTEM
    WELL CONTROL S Y STEM 1. RIG FLOOR MUD MANIFOLD 2. INSIDE BOP 3. BOP S T ACK 4. CHOKE & KILL LINES 5. CHOKE & KILL...
  • Rig Definition
    Drilling rigs: equipment and tool us e d for - DRILLING - RE-DRILL OR R E-E N TRIES - WOR K O V ERS

About Me

Unknown
View my complete profile

Copyright 2009 - RIGBOOK

Blogspot Theme designed by: Ray Creations, Ray Hosting, .